/ challenges-old / cymbal2
Sign in
challenges-old / cymbal2
365d2d5
Branches
main
cymbal2 / MODEL.md
161 lines · 11.7 KBCodeBlameHistory
d6a9b3fTwo challenges, each with three strikes at 0, 2 and 4 s; 7 s outputJeremy Magland 3Every challenge in this repository is an instance of the model defined here. A challenge fixes the mid-surface profile $Z(r)$, the thickness $h(r)$ and the output scale $s_\text{ref}$; its README gives those and nothing else changes. The problem is to compute the pressure signal $p(t)$ of the output section for seven seconds, during which the cymbal is struck three times, and write it as a wav file.
5## Geometry
7The cymbal is a thin shell. Its mid-surface is the graph of a function $Z$ over the annulus
9$$
92b7504The stand as a rigid clamp at the mounting radius (20 mm), replacing the hole and the rigid-motion constraintJeremy Magland 10A = \{ (x, y) : r_m \le r \le R \}, \qquad r = \sqrt{x^2 + y^2},
92b7504The stand as a rigid clamp at the mounting radius (20 mm), replacing the hole and the rigid-motion constraintJeremy Magland 13and its thickness is $h$. Both are functions of $r$ alone and are given per challenge. The inner edge $r = r_m$ is where the stand holds the cymbal: the felt washers clamp it there, and the model takes the clamp as rigid, so the displacement and the slope of $w$ vanish on that circle. The rim $r = R$ is free. The mounting hole and the metal under the felt, inside $r_m$, are not part of the model. Below, subscripts $x$, $y$ and $t$ denote partial derivatives, Greek indices run over $x, y$, repeated Greek indices are summed, and $\delta_{\alpha\beta}$ is the Kronecker delta.
15## Unknowns and strains
17The unknowns are the displacements $u(x, y, t)$, $v(x, y, t)$, $w(x, y, t)$ of the mid-surface point $(x, y, Z(x, y))$ along the $x$, $y$ and $z$ axes. The membrane strains are those of shallow-shell theory,
19$$
20\varepsilon_{xx} = u_x + Z_x w_x + \tfrac{1}{2} w_x^2, \qquad
21\varepsilon_{yy} = v_y + Z_y w_y + \tfrac{1}{2} w_y^2, \qquad
22\varepsilon_{xy} = \tfrac{1}{2} \left( u_y + v_x + Z_x w_y + Z_y w_x + w_x w_y \right),
23$$
25and the bending strains are $\kappa_{\alpha\beta} = w_{\alpha\beta}$.
27## Stress resultants
d7c7d17Realistic crash: plate-synthesis losses (sigma1 Laplacian term, small eta), firm 6 m/s stroke, rim 0.65 mm, strikes on the bell flank, the bow and the thin edgeJeremy Magland 29The material is linearly elastic and isotropic, with Young's modulus $E$, Poisson's ratio $\nu$ and density $\rho$, and has a small Kelvin-Voigt viscosity of time constant $\eta$. The membrane forces and bending moments per unit length are
31$$
32N_{\alpha\beta} = \frac{E h}{1 - \nu^2} \left[ (1 - \nu)\, \tilde\varepsilon_{\alpha\beta} + \nu\, \tilde\varepsilon_{\gamma\gamma}\, \delta_{\alpha\beta} \right], \qquad
33M_{\alpha\beta} = D \left[ (1 - \nu)\, \tilde\kappa_{\alpha\beta} + \nu\, \tilde\kappa_{\gamma\gamma}\, \delta_{\alpha\beta} \right],
34$$
36with $\tilde\varepsilon = \varepsilon + \eta\, \varepsilon_t$, $\tilde\kappa = \kappa + \eta\, \kappa_t$ and $D = E h^3 / (12 (1 - \nu^2))$.
38## Equations of motion
92b7504The stand as a rigid clamp at the mounting radius (20 mm), replacing the hole and the rigid-motion constraintJeremy Magland 40The motion is defined by its weak form. The solution satisfies $u = v = w = 0$ and $\partial w / \partial r = 0$ on the inner edge $r = r_m$, and so do the test functions; the rim carries no condition. For all such $\delta u, \delta v \in H^1(A)$ and $\delta w \in H^2(A)$,
42$$
d7c7d17Realistic crash: plate-synthesis losses (sigma1 Laplacian term, small eta), firm 6 m/s stroke, rim 0.65 mm, strikes on the bell flank, the bow and the thin edgeJeremy Magland 43\int_A \rho h \left[ (u_{tt} + 2 \sigma_0 u_t)\, \delta u + (v_{tt} + 2 \sigma_0 v_t)\, \delta v + (w_{tt} + 2 \sigma_0 w_t)\, \delta w + 2 \sigma_1\, \nabla w_t \cdot \nabla \delta w \right] dA
f723da2cymbal2: four challenges on one thin-shell cymbal model with a stick strikeJeremy Magland 44+ \int_A \left( N_{\alpha\beta}\, \delta\varepsilon_{\alpha\beta} + M_{\alpha\beta}\, \delta\kappa_{\alpha\beta} \right) dA
d6a9b3fTwo challenges, each with three strikes at 0, 2 and 4 s; 7 s outputJeremy Magland 45= - \sum_{i=1}^{3} F_i(t) \int_A \phi_i\, \delta w\, dA,
d7c7d17Realistic crash: plate-synthesis losses (sigma1 Laplacian term, small eta), firm 6 m/s stroke, rim 0.65 mm, strikes on the bell flank, the bow and the thin edgeJeremy Magland 48where $\sigma_0$ and $\sigma_1$ are loss coefficients, $F_i$ and $\phi_i$ are the force and footprint of the $i$th strike of the next section, and $\delta\varepsilon$, $\delta\kappa$ are the variations of the strains at the current state,
50$$
51\delta\varepsilon_{xx} = \delta u_x + (Z_x + w_x)\, \delta w_x, \qquad
52\delta\varepsilon_{yy} = \delta v_y + (Z_y + w_y)\, \delta w_y, \qquad
53\delta\varepsilon_{xy} = \tfrac{1}{2} \left( \delta u_y + \delta v_x + (Z_x + w_x)\, \delta w_y + (Z_y + w_y)\, \delta w_x \right), \qquad
54\delta\kappa_{\alpha\beta} = \delta w_{\alpha\beta}.
55$$
57Where the solution is smooth this is the strong form
59$$
60\rho h\, (u_{tt} + 2 \sigma_0 u_t) = \partial_x N_{xx} + \partial_y N_{xy}, \qquad
61\rho h\, (v_{tt} + 2 \sigma_0 v_t) = \partial_x N_{xy} + \partial_y N_{yy},
62$$
64$$
d7c7d17Realistic crash: plate-synthesis losses (sigma1 Laplacian term, small eta), firm 6 m/s stroke, rim 0.65 mm, strikes on the bell flank, the bow and the thin edgeJeremy Magland 65\rho h\, (w_{tt} + 2 \sigma_0 w_t) - 2 \sigma_1\, \nabla \cdot (\rho h\, \nabla w_t) = \partial_\alpha \left[ N_{\alpha\beta} (Z_\beta + w_\beta) \right] - \partial_{\alpha\beta} M_{\alpha\beta} - \sum_i F_i(t)\, \phi_i,
92b7504The stand as a rigid clamp at the mounting radius (20 mm), replacing the hole and the rigid-motion constraintJeremy Magland 68together with the clamped conditions at $r = r_m$ and the free-edge conditions that the weak form implies at $r = R$. The shell is at rest at $t = 0$: $u = v = w = 0$ and $u_t = v_t = w_t = 0$.
d7c7d17Realistic crash: plate-synthesis losses (sigma1 Laplacian term, small eta), firm 6 m/s stroke, rim 0.65 mm, strikes on the bell flank, the bow and the thin edgeJeremy Magland 72The cymbal is struck three times by a drum stick, at the times $t_i$ and points $(x_i, 0)$ of the parameter table: on the outer flank of the bell, then on the bow at $0.59 R$, then near the rim at $0.91 R$, two seconds apart. The stick is a point mass $m_s$ that moves along $z$ and interacts with the shell through a Hertz contact force. The $i$th strike has the footprint
74$$
d6a9b3fTwo challenges, each with three strikes at 0, 2 and 4 s; 7 s outputJeremy Magland 75\phi_i(x, y) = \frac{1}{c_\phi\, \pi R_s^2}\; \phi_0\!\left( \frac{\varrho_i}{R_s} \right), \qquad
76\varrho_i = \sqrt{(x - x_i)^2 + y^2}, \qquad
f723da2cymbal2: four challenges on one thin-shell cymbal model with a stick strikeJeremy Magland 77\phi_0(s) = \begin{cases} \tfrac{1}{2} (1 + \cos \pi s), & 0 \le s \le 1, \\ 0, & s > 1, \end{cases} \qquad
78c_\phi = \tfrac{1}{2} - \tfrac{2}{\pi^2},
79$$
d6a9b3fTwo challenges, each with three strikes at 0, 2 and 4 s; 7 s outputJeremy Magland 81which lies inside $A$ and integrates to one over $A$, and the surface height under it is the footprint average $\bar w_i(t) = \int_A \phi_i\, w\, dA$. Let $z_i(t)$, defined for $t \ge t_i$, be the height of the tip of the $i$th stick. It meets the surface at $t_i$ with relative speed $v_0$, wherever the motion of the shell has taken that surface,
83$$
d6a9b3fTwo challenges, each with three strikes at 0, 2 and 4 s; 7 s outputJeremy Magland 84z_i(t_i) = \bar w_i(t_i), \qquad \dot z_i(t_i) = \partial_t \bar w_i(t_i) - v_0.
d6a9b3fTwo challenges, each with three strikes at 0, 2 and 4 s; 7 s outputJeremy Magland 87The penetration is $\delta_i(t) = \bar w_i(t) - z_i(t)$ and the contact force is
89$$
90F_i(t) = k_c\, \max(\delta_i(t), 0)^{3/2} \quad \text{for } t \ge t_i, \qquad F_i(t) = 0 \quad \text{for } t < t_i.
91$$
93It acts on the stick upward, $m_s \ddot z_i = F_i$, and on the shell downward, as the traction $-F_i \phi_i$ along $z$ in the equations of motion. Each stick is otherwise free: there is no gravity and no hand, it stays in the model after its rebound, and contact occurs whenever $\delta_i > 0$, including any later contact.
95## Output
365d2d5Output: Rayleigh integral of the acceleration with its area mean removed (no baffled monopole from the clamped shell's low modes)Jeremy Magland 97The output is the acoustic pressure at the listener point $\mathbf{x}_L$ given by the Rayleigh integral of the transverse acceleration over the shell, with the area mean of the acceleration removed,
99$$
365d2d5Output: Rayleigh integral of the acceleration with its area mean removed (no baffled monopole from the clamped shell's low modes)Jeremy Magland 100p(t) = \frac{\rho_a}{2\pi} \int_A \frac{1}{d(x, y)}\; \left[ w_{tt}\!\left( x, y,\; \tau \right) - \bar w_{tt}(\tau) \right] dA, \qquad
101\tau = t - \frac{d(x, y)}{c_a}, \qquad
102d(x, y) = \left| \mathbf{x}_L - (x, y, Z(x, y)) \right|, \qquad
103\bar w_{tt}(\tau) = \frac{1}{|A|} \int_A w_{tt}(x, y, \tau)\, dA,
365d2d5Output: Rayleigh integral of the acceleration with its area mean removed (no baffled monopole from the clamped shell's low modes)Jeremy Magland 106with $w_{tt}$ taken as zero at negative times. The Rayleigh integral is the field of a planar source in a rigid baffle; the acoustic problem is not solved, and the air exerts no load on the shell. The mean is removed because a thin body in free air radiates its net volume acceleration as a dipole, weaker than the baffled monopole by a factor of order $(kR)^2$, which is about forty decibels for the shell's lowest modes; those modes have a net volume acceleration because the mount holds the center, and without this correction they would dominate the output with a hum that a real cymbal does not produce. Above a few hundred hertz the correction is negligible.
108## Remarks
92b7504The stand as a rigid clamp at the mounting radius (20 mm), replacing the hole and the rigid-motion constraintJeremy Magland 110The clamp at the mount is what makes the strike position matter. Struck on the bell, a shell whose center is free would move its whole bell as a piston on the bow and swallow the stick's energy into the bow's modes like any other hit; held at the mount, the bell hit loads the bell against the support, the stick rebounds, and mainly the bell's own high modes ring. The clamp also removes the rigid motions, so nothing needs to be said about drift. The felt's compliance and the slow swing of a real cymbal on its stand are neglected.
d7c7d17Realistic crash: plate-synthesis losses (sigma1 Laplacian term, small eta), firm 6 m/s stroke, rim 0.65 mm, strikes on the bell flank, the bow and the thin edgeJeremy Magland 112The losses are the three of plate synthesis. In the linear regime about a flat uniform state a bending mode of wavenumber $k$ and angular frequency $\omega$ decays at the rate $\sigma_0 + \sigma_1 k^2 + \eta \omega^2 / 2$, with $k^2 = \omega \sqrt{\rho h / D}$. With the values below the sixty-decibel decay time is about 5 s below 500 Hz, 3.5 s at 2 kHz, 2 s at 5 kHz, 1.2 s at 10 kHz and 0.8 s at 15 kHz, roughly the ring of a crash cymbal; the viscous term is small in the audible range and gives the model a definite cutoff above it.
114## Parameters common to all challenges
116| Symbol | Value | Unit | Meaning |
117| --- | --- | --- | --- |
118| $R$ | 0.2032 | m | outer radius (16 in diameter) |
92b7504The stand as a rigid clamp at the mounting radius (20 mm), replacing the hole and the rigid-motion constraintJeremy Magland 119| $r_m$ | 0.02 | m | mounting radius (clamped inner edge) |
f723da2cymbal2: four challenges on one thin-shell cymbal model with a stick strikeJeremy Magland 120| $E$ | 110e9 | Pa | Young's modulus (B20 bell bronze) |
121| $\nu$ | 0.34 | | Poisson's ratio |
122| $\rho$ | 8800 | kg/m^3 | density |
124| $\sigma_1$ | 8e-5 | m^2/s | loss coefficient of the Laplacian term |
125| $\eta$ | 1e-9 | s | Kelvin-Voigt time constant |
f723da2cymbal2: four challenges on one thin-shell cymbal model with a stick strikeJeremy Magland 126| $m_s$ | 0.02 | kg | stick tip mass |
f723da2cymbal2: four challenges on one thin-shell cymbal model with a stick strikeJeremy Magland 128| $k_c$ | 1e9 | N/m^(3/2) | Hertz contact stiffness |
129| $R_s$ | 0.005 | m | footprint radius |
d6a9b3fTwo challenges, each with three strikes at 0, 2 and 4 s; 7 s outputJeremy Magland 130| $t_1, t_2, t_3$ | 0, 2, 4 | s | strike times |
d7c7d17Realistic crash: plate-synthesis losses (sigma1 Laplacian term, small eta), firm 6 m/s stroke, rim 0.65 mm, strikes on the bell flank, the bow and the thin edgeJeremy Magland 131| $x_1, x_2, x_3$ | 0.045, 0.12, 0.185 | m | strike points on the $x$ axis: bell flank, bow, rim |
f723da2cymbal2: four challenges on one thin-shell cymbal model with a stick strikeJeremy Magland 132| $\rho_a$ | 1.204 | kg/m^3 | air density |
133| $c_a$ | 343 | m/s | speed of sound in air |
134| $\mathbf{x}_L$ | (0.65, 1.125, 0.75) | m | listener point |
973c7f2Bell flank slope at the first strikeJeremy Magland 136All values are exact decimal numbers. The listener is 1.5 m from the origin, 30 degrees above the plane $z = 0$, at an azimuth of 60 degrees from the $x$ axis, on which the strike points lie. The strikes are the same in both challenges. On the crash cymbal the first lands on the outer flank of the bell (slope 0.29), the second on the bow, the third 18 mm from the rim on the thin edge; on the flat annulus they land at the same radii. The stick carries 0.36 J, a firm stroke rather than the hardest a drummer gives. The stick values are provisional until the first solutions have been heard; they will be fixed before any solution is published, and a challenge is never changed after that.
138## Deliverable
140| Property | Value |
141| --- | --- |
142| channels | 1 |
143| sample rate $f_s$ | 48000 Hz |
d6a9b3fTwo challenges, each with three strikes at 0, 2 and 4 s; 7 s outputJeremy Magland 144| number of samples $N$ | 336000 (7.0 s) |
f723da2cymbal2: four challenges on one thin-shell cymbal model with a stick strikeJeremy Magland 145| sample format | 32-bit IEEE float (WAVE_FORMAT_IEEE_FLOAT) |
146| sample $k$, for $k = 0, \dots, N-1$ | $p(k / f_s) / s_\text{ref}$ |
147| $s_\text{ref}$ | `output.signal_scale` in the challenge's challenge.json, in Pa |
d6a9b3fTwo challenges, each with three strikes at 0, 2 and 4 s; 7 s outputJeremy Magland 149The first sample is at $t = 0$, the instant the first stick touches the shell. Samples are pointwise values of $p$ with no anti-aliasing filter. Do not normalize the signal; absolute amplitude is compared.
151## Error measures
153Two relative errors against the reference solution are computed over the $N$ samples: the spectrogram $\ell^2$ error (primary; periodic Hann window of length 2048, hop 512, no padding) and the waveform $\ell^2$ error. The formulas are those of the [string challenge](https://vault1.magland.org/challenges/string/blob/main/challenges/string-pluck-v1/README.md#error-measures). The spectrogram error ranks because the response to this strike is chaotic: solutions that agree in every band still differ in waveform after the first tenth of a second, and the waveform error is then near $\sqrt{2}$ for any two of them.
155## Reference solution
157The reference is chosen automatically among the submitted solutions by the rule described in the [repository README](README.md), unless `reference_solution` in challenge.json names one.
159## Optional field export
b9146b9Hold the shell's six rigid motions: the shallow-shell strains are not rotation invariant and a free, tilting shell is unphysicalJeremy Magland 161A submission may provide the transverse displacement for visualization; it is not scored. The file is HDF5 with datasets `x` and `y`, float64, shape (61,), $x_i = -R + 2R\, i / 60$ and the same for $y$; `t`, float64, shape (3501,), $t_k = k / 500$; and `u`, float32, shape (3501, 61, 61), with `u[k, j, i]` $= w(x_i, y_j, t_k)$ in meters for grid points in $A$ and NaN elsewhere. Root attributes `challenge_id`, `solution_id`, `quantity` and `units` are recommended. The file is about 50 MB and belongs in git LFS or at an external URL.
↑↓ move↵openescclose